Walter MP060, MP160, and MP260 milling cutters reduce cutting forces and vibration

Walter has introduced the MP060, MP160 and MP260 face, shoulder, and slot drill milling cutters with brazed PCD cutting edges.

These cutters are designed for machining aluminum, Al-Si alloys, magnesium and magnesium alloys, as well as composites and plastics.

The MP060 face milling cutter with a great number of teeth (z) between 10 and 22, and with diameters from 40 mm, can be used for roughing and finishing large surfaces and flat shoulders.

The MP160 (z = 3–4) and MP260 (z = 2–3) shoulder and slot milling cutters, with either cylindrical shank or ScrewFit adaption and diameters of 16 to 40 mm and 4 to 20 mm respectively, are suitable for smaller flat surfaces, for plunging (MP260) and full slotting, as well as, in the case of the MP160, ramping, drilling and re-drilling work.

All three milling cutters are equipped with internal coolant supply and can be used with emulsions and minimum quantity lubrication.

Walter Tools | www.walter-tools.com/us