- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Turret Punch Presses
- October 1, 2010
- Product Release
- Fabricating
LVD Strippit’s VX series of CNC turret punch presses are designed for fast processing of thin sheet materials. They combine a 20-metric-ton hydraulic ram with a 48-station turret.
This new generation of punch press employs an energy-saving hydraulic press drive and motor system optimized for high-speed operation, which delivers axis speeds of up to 530 hits per minute on 1-in. centers and up to 1,750 SPM.
Three work clamps can be programmed to a position on the X carriage and individually relocated to a new position within the part program. This reduces or eliminates “no punch” zones, increasing material utilization, the company reports.
A double-track turret provides a configuration of 48 stations featuring four standard 3.5-in., autoindexable stations that can utilize the latest wheel tool technology. Every station accepts shaped punches and dies and can be further enhanced with the addition of indexable multitools. This results in minimized turret setup times and higher productivity.
A 1-in. feed clearance between the upper and lower turret allows forming of lances, louvers, embossments, and card-guides.
These punch presses feature a table with the capacity to handle sheet weights of up to 330 lbs. A full brush table minimizes noise and part scratching and permits changeover or replacement of individual brushes.
LVD Strippit, 716-542-4511, www.lvdgroup.com
subscribe now
Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!
Start Your Free Subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of Canadian Metalworking.
Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.
- Trending Articles
Aluminum MIG welding wire upgraded with a proprietary and patented surface treatment technology
CWB Group launches full-cycle assessment and training program
Achieving success with mechanized plasma cutting
Hypertherm Associates partners with Rapyuta Robotics
Brushless copper tubing cutter adjusts to ODs up to 2-1/8 in.
- Industry Events
MME Winnipeg
- April 30, 2024
- Winnipeg, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Windsor Seminar
- April 30, 2024
- Windsor, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Kitchener Seminar
- May 2, 2024
- Kitchener, ON Canada
Automate 2024
- May 6 - 9, 2024
- Chicago, IL
ANCA Open House
- May 7 - 8, 2024
- Wixom, MI