Chipping Tech Cell - Products
Chipping Products
Results: 50
Mazak INTEGREX i-300 multitasking center
Mazak will debut its INTEGREX i-300 multitasking center. Suitable for midsize, complex part machining, this machine creates productivity...
|
|
Synthetic Metalworking Fluid
CIMTECH 310®, a low-pH synthetic fluid from manufacturer Cimcool Fluid Technology, is designed for use in the automotive and aerospace...
|
|
Multifeed Honing
Sunnen’s new multifeed honing technology gives users a choice of tool-feed modes to achieve the shortest cycle times, lowest part cost, and...
|
|
HMC for Hard Metals
Mitsui Seiki’s new HU100A-5XLL
(HMC) can machine large, complex hard-metal parts weighing up to 6,600 lbs.
This machine has an X, Y, Z...
|
|
Zero-backlash Servo Drive
DE-STA-CO’s new CAMCO® RSD is a zero-backlash, cam-actuated rotary servo drive that can be used with both rotary and linear systems for...
|
|
Water-soluble Oil for Titanium, Aluminum Machining
Rustlick has released the Ultracut Aero, a new, water-soluble oil for ferrous and nonferrous metals including titanium, aluminum, INCONEL®...
|
|
Vertical Machining Center
Doosan’s new VC430 vertical machining center (VMC) features a 25-HP motor that generates up to 12,000 RPM at the spindle and 123.6 ft.-lbs....
|
|
Long-tube Honing
Sunnen's new HTD tube honing system has a 52-ft. stroke and can handle up to39-in.-diameter parts.
An electronically controlled, 40.23-HP...
|
|
Mill/Turn Center With Twin Spindles
Stama America has introduced the MC 726/MT-2C mill/turn, twin-spindle machining center for automotive, fluid power, tooling, and medical...
|
|
Lighter-duty Drag Conveyor
PRAB now offers a lighter-duty version of its drag conveyor technology that integrates under certain types of CNC machines for removal of...
|
|
8-spindle CNC Production Center
ZPS America offers the new 8-spindle ZPS 867 CNC multispindle production center, which can accommodate stock diameters up to 72 mm....
|
|
Encapsulated Clamping Device
The KONTEC KSK 5A from manufacturer Schunk is a completely encapsulated, five-axis, centric clamping device.
The device’s closed design...
|
|
Three-jaw Power Chuck
The ROTA NCS from Schunk is a sealed, three-jaw power chuck that applies high clamping force with an active pull-down effect. This creates...
|
|
Universal Holding Fixture
The Kostyrka universal holding fixture (UHF) from Euro-Tech Corp. is a chucking device that can be adapted to several hundred different...
|
|
Rotary Parts Washer
Precision cleaning of large metal parts or multiple batches of smaller parts can now be performed in a stainless steel, rotary-design...
|
|
Oil Mist Collectors
FiltermistXcel2 is the latest generation of oil mist collectors from Filtermist International.
This system, which removes oil mist...
|
|
Carbon Fiber Clamping
Higher productivity, lower energy consumption, and offloading of the machine drive are all features of the new carbon clamping devices...
|
|
Transport Mechanism for Large Telescopic Steel Covers
High feed rates and high accelerations are no longer excluded with large, heavy telescopic steel covers. Hennig, a supplier of machine...
|
|
Doosan – Booth S-8100
The Lynx 300 turning center features a 20-HP, high-torque motor that provides the power for heavy cuts and the speed to produce...
|
|
Heavy-duty Lathes
Knuth Machine Tools USA has introduced the DL E series of universal lathes for heavy-duty and single-part production.
These lathes...
|
|
High-speed Turning Center
Haas says its ST-20SS turning center was designed to be extremely rigid and thermally stable. All castings were optimized using finite...
|
|
Touch Probes for Lathes
Renishaw’s new RLP40 and OLP40 lathe inspection touch probes offer a choice of signal transmission technologies, radio or optical, to...
|
|
Turning Center for Job Shops
Mazak’s new Quick Turn Smart series of two-axis lathes is suitable for high-productivity turning.
The QT-Smart 200 model...
|
|
Family of Turning Centers
Doosan’s Lynx 220, a family of five turning centers, has chucks ranging from 6.5 in. to 8.25 in., and each is equipped with a 20-HP...
|
|
Heavy Cutting on Large Workpieces
FEMCO Inc. has introduced the HL-55/200 lathe for heavy cutting on large workpieces.
The solid wraparound boxway construction is...
|
|
Multiple Configurations With Live Tooling
Romi Machine Tools Ltd. now offers C620 CNC lathes in 1- or 2-m bed lengths with the swing over the bed length measuring 620 mm....
|
|
Core Machine Tools
Since 1950 Elliott Matsuura Canada has been supplying machine tools for the Canadian metal cutting industry, coast to coast.
At...
|
|
Medical Part Machining
The new SR-20RIII Star machine from Star CNC features a Fanuc controller and rapid speeds of 35,000 mm/min.
This machine is the fourth...
|
|
Large-Mold Applications
GF AgieCharmilles’ Mikron HPM 800U machining center offers dynamic, three-axis milling suited for the aerospace and automotive...
|
|
Large-Workpiece Machining
The FJV-35/60 II from Mazak is a double-column vertical machining center designed for the high-speed, high-precision production of large...
|
|
Five-axis Machining
MAG’s MEGA 5 five-axis horizontal machining center has two spindle options for the high-torque machining of tough materials such as...
|
|
Die/Mold and Medical Contour Machining
According to Makino, the new F-Series vertical machining center was designed to provide stiffness and rigidity for chatter-free cutting and...
|
|
Added Rotary Tables
The recently introduced DNM vertical machining centers from Doosan are now equipped with factory-installed Tsudakoma TN161 or TN201...
|
|
Thin Grooving and Microturning Work
Genevieve Swiss Industries has introduced the UTILIS® Multidec 1600 series of thin grooving and microturning tools that are capable of work...
|
|
Hydraulic Toolholders
Schunk Inc. has redesigned its Tendo brand of toolholders to be able to clamp different types of cutting tools with cylindrical shanks...
|
|
New Magnetic Workholding System
SAV North America has introduced a new line of electropermanent workholding magnets designed to accommodate a range of material sizes and...
|
|
Lyndex-Nikken – Booth 31009
Lyndex-Nikken will introduce the 5AX-201 rotary table featuring an 8-in. faceplate trunnion work envelope that can be incorporated in small...
|
|
Methods Machine Tools – Booth 17017
New from Methods is the KIWA KH-45 horizontal machining center (HMC) that offers in-the-field, expandable tool and pallet technology,...
|
|
Rotary Broaching Toolholders
Slater Tools has expanded its line of rotary broaching toolholders for CNC, screw, and Swiss lathe machines as well as milling machines....
|
|
Hougen Manufacturing - Booth 282
Three new drilling products will be featured at the show, along with the company’s range of portable equipment and annular cutters
The...
|
|
Haas Automation - Booth 21013
Haas will unveil two new machines at CMTS 2009: the ST-30 – live tool/C- axis CNC turning center and the DT-1 high-speed drill/tap...
|
|
Quick Job Changeover
The Hardinge Group has released the Super-Precision Quest CHNC turning center, a machine that comes with either a 27-mm, 5C collet-ready...
|
|
Improved Chip, Coolant Flow
Haas Automation has created a pair of new turning centers using digital design and analysis tools.
All castings of the Haas SS-30 and...
|
|
Hard Turning of Small Parts
Miyano Machinery has introduced the new GN-3200 turning center. With a 0.1-µm (4 millionths) input tolerance, the machine is ideal for hard...
|
|
Mill-turn With Increased Travels
For mill-turning complex components in a single setup, Hurco has added a new turning center to its range of 6-, 8-, and 10-in. chuck...
|
|
Matsuura Cublex-25
The Cublex-25 is a five-axis, complex machining center that Matsuura, as a specialized manufacturer of machining centers, has developed...
|
|
DMG CTX Series
DMG’s new series of turning/milling machines includes the CTX beta TC and CTX gamma TC, which can handle turning lengths from 49.2 to...
|
|
Hyundai-Kia SKT2500MTS
In this day and age of just-in-time and flexible manufacturing, finishing the part in one handling, one setup, and in one machine is of...
|
|
Mori Seiki NT6600 DCG
Late last year Mori Seiki released the NT6600 DCG®, an integrated mill/turn center that is suitable for machining large parts and long...
|
|
Amada Wasino Mi8
The new Mi8 five-axis turning and milling center from Amada Wasino has a B axis with 270-degree range of motion that is capable of...
|
|
